₪ 590
Out of stock
2×2 high-efficiency Wi-Fi 6
5 GHz band 2×2 MU-MIMO and OFDMA with radio rate of 1.2 Gbps
2.4 GHz band 2×2 MIMO with radio rate of 300 Mbps
Gigabit Ethernet, powered with 802.3af PoE (PoE injector not included)
Compatible with UAP-nanoHD covers and recessed mounting bracket
Managed with UniFi Network Application Version: 5.14.3 or higher
Out of stock
| Mechanical | |
| Dimensions | Ø160 x 32.65 mm |
| Weight | Without Mount: 300 g With Mount: 315 g |
| Hardware | |
| Processor Specs | 880 MHz MIPS 1004 KEc |
| Memory Information | 256 MB |
| Management Interface | Ethernet In-Band |
| Networking Interface | (1) 10/100/1000 Mbps Ethernet RJ45 |
| Buttons | Factory Reset |
| LEDs | White/Blue |
| Power Method | 802.3af PoE, Passive PoE (48V) |
| Power Supply | 802.3af PoE; 48V, 0.32A PoE Adapter (Not Included) |
| Supported Voltage Range | 44 to 57VDC |
| Max. Power Consumption | 12W |
| Max. TX Power 2.4GHz / 5GHz | 23 dBm |
| MIMO 2.4GHz / 5GHz | 2 x 2 |
| Throughput Speeds 2.4GHz / 5GHz | 300 Mbps / 1201 Mbps |
| Antenna Gain 2.4GHz / 5GHz | 2.8 dBi / 3 dBi |
| Operating Temperature | -30 to 60° C |
| Operating Humidity | 5 - 95% Noncondensing |
| Certifications | CE, FCC, IC |
| Software | |
| Wi-Fi Standards | 802.11a/b/g Wi-Fi 4/Wi-Fi 5/Wi-Fi 6 |
| BSSID | 8 per Radio |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest Trafc Isolation | Supported |
| Concurrent Clients | 300+ |
| Wireless Security | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3*) |
UniFi 6 Lite is a 2×2 Wi-Fi 6 access point that delivers up to 1.5 Gbps aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios.
Mount UniFi 6 Lite horizontally in the ceiling to cover a high-density environment, or mount it vertically on the wall to extend its range.
UniFi 6 Lite has a compact and nano-sized design, so it can use nanoHD covers and mounting accessories.
לקראת חג פסח ייתכנו עיכובים במשלוחים. חג שמח Dismiss
Skip to content
